Published:
Last updated:

Direct answer: The CINOART PT2 is the standalone countertop model; PTB-FI and PTB-MY sit below the grinder, so you choose between them by which grinder you have.

This comparison is for US cafe, chain, and hotel buyers who already want a CINOART automatic tamper and need to match a model to the bar. It is not a definition guide, an automatic-versus-manual debate, or a cross-brand ranking. For the short model cards, start with CINOART automatic tampers on the product hub; the figures below follow each model’s product page.

Where a product page does not list a figure, the table shows a dash. If you need that detail, ask us when you request a quote, rather than assuming another model’s number applies.

Which CINOART automatic tamper should you buy?

If you want a station on the counter, choose the PT2. If you want to tamp under the grinder, pick PTB-FI or PTB-MY to match the grinder you already run.

If you…Start withWhy
Want a standalone countertop tamping stationCINOART PT2The PT2 is the standalone countertop model. Ask us for PT2 size, weight, and power when you request a quote.
Tamp directly under a Fiorenzato grinderCINOART PTB-FIPer the PTB-FI product page, the model is designed for Fiorenzato grinders. If you need an additional frame, ask us when you request a quote.
Tamp directly under a Mythos or Anfim grinderCINOART PTB-MYPer the PTB-MY product page, the model is designed for Mythos and Anfim grinders. If you need an additional frame, ask us when you request a quote.

CINOART does not publish a shots-per-day rating for these models.

Standalone vs below-grinder: PT2, or PTB-FI and PTB-MY

The PT2 is a standalone tamping station. It sits on the counter, so the barista doses at the grinder, moves the portafilter to the tamper, then goes to the group. The product hub describes it as a universal counter setup.

PTB-FI and PTB-MY sit below the grinder, so grinding and tamping happen in one place. Pick the model that matches the grinder you already run. Per the PTB-FI product page, PTB-FI is designed for Fiorenzato grinders. Per the PTB-MY product page, PTB-MY is designed for Mythos and Anfim grinders.

This page compares PT2 with PTB-FI and PTB-MY. For the full range, including the standalone PT1, see the automatic tamper product hub. If you are still choosing a grinder, settle that first, then return to the matching PTB model or the standalone PT2.

CINOART PT2 vs PTB specs compared

The table below follows each model’s product page. A dash means that page does not list the item. If you need the missing detail, ask us when you request a quote.

SpecPT2PTB-FIPTB-MY
WorkflowStandalone tamping stationBelow-grinderBelow-grinder
Primary fitUniversal counter setupFiorenzato grindersMythos and Anfim grinders
Adjustable pressure2–38 kg10–30 kg10–30 kg
Pressing duration1.2 seconds1.2 seconds1.2 seconds
Pressure control and modesSegmented multi-tamping, 1, 2, or 3 times, with independent pressure on each tamp; total tamp counter; sleep modeQuick-switch design with three presets; usage-count recordThree presets; 4.3-inch large touch screen
LevelingPatent Guide Leveling System (GLS)Guide Leveling SystemPatent GLS – Guide Leveling System
Tamper diameter / basket fitStandard 58 mm, flat bottom; fits 58–58.3 mm baskets, including VST; also confirmed for single-spout, double-spout, and bottomless portafilters58 mm, standard; fits 58–58.3 mm baskets, including VST58 mm, standard; fits 58–58.3 mm baskets, including VST
Voltage100–240V, 50/60Hz; the unit operates at 12V through an inline step-down transformer100–240V, 50/60Hz100–240V, 50/60Hz
Power—60W60W
Product size—274 × 230 × 190 mm389 × 188 × 198 mm
Package size—315 × 270 × 366 mm435 × 230 × 273 mm
Net weight—6.15 kg (approximately 13.6 lb)7 kg (approximately 15.4 lb)
Housing and colorCast alloy housing and all-metal featuresFull metal frame and exterior; black and whiteFull metal frame and exterior; black and white
Accessories listed—QR-code card, clean tool, grinds tray, screwdriverQR-code card, clean tool, grinds tray, screwdriver
PricingRequest a quoteRequest a quoteRequest a quote

Notes on the table:

  • Workflow and primary-fit labels follow the CINOART automatic tampers hub. Unless a note below says “per CINOART,” the other figures follow each model’s product page.
  • Product pages do not label which size figure is length, width, or height.
  • Per CINOART, the PT2, PTB-FI, and PTB-MY all use the same patented Guide Leveling System (GLS), and all three fit 58–58.3 mm baskets, including VST.
  • Net weights for PTB-FI (6.15 kg) and PTB-MY (7 kg) are per CINOART. Pound figures are approximate conversions, not a second specification list. Approximate pound conversions from the kilogram pressure ranges (2–38 kg is about 4–84 lb; 10–30 kg is about 22–66 lb) are also conversions, not a second specification list.
  • PT2 power, product size, package size, net weight, and accessories are not listed on the PT2 product page. Ask us when you request a quote.
  • Per the PT2 product page, the PT2 has a cast alloy housing and all-metal features.
  • Prices are quoted, not listed on the product pages.

The PT2 standalone station

The PT2 is the standalone countertop model. Per the PT2 product page, it adjusts from 2 to 38 kg (about 4–84 lb) and can run one, two, or three tamps in a cycle with a different pressure on each. It uses the patent Guide Leveling System, and the unit operates at 12V through an inline step-down transformer while the rated supply is 100–240V, 50/60Hz.

CINOART PT2 standalone countertop automatic tamper.

Per CINOART, the PT2 uses the same patented GLS as the PTB models and fits 58–58.3 mm baskets, including VST. Per the PT2 product page, it is also confirmed for single-spout, double-spout, and bottomless portafilters, with a standard 58 mm flat-bottom tamper. The PT2 product page does not list a size, weight, or power figure; ask us when you request a quote if you need those details.

PTB-FI vs PTB-MY

Choose the PTB model from the grinder it is built for, not from a combined compatibility list. Per the PTB-FI product page, PTB-FI is designed for Fiorenzato grinders, with a 10–30 kg range (about 22–66 lb), a 1.2-second tamp, three presets, and a listed size of 274 × 230 × 190 mm. Per CINOART, its net weight is 6.15 kg (approximately 13.6 lb). Per the PTB-MY product page, PTB-MY is designed for Mythos and Anfim grinders, with the same 10–30 kg range and 1.2-second tamp, a 4.3-inch large touch screen, and a listed size of 389 × 188 × 198 mm. Per CINOART, its net weight is 7 kg (approximately 15.4 lb).

CINOART PTB-FI below-grinder automatic tamper in white, front view
CINOART PTB-MY below-grinder automatic tamper in black, front view with its touch screen

Both PTB models use the patented Guide Leveling System and, per CINOART, fit 58–58.3 mm baskets, including VST.

The PTB-FI product page also says the unit can fit Mahlkonig and Mazzer grinders with an additional frame. The PTB-MY product page also says it can fit Compak and Markibar grinders with an additional frame. If you need an additional frame, ask us when you request a quote so we can confirm the current frame and the grinder you actually run.

What to confirm when you request a quote

The published spec sheets already give you pressure, duration, and voltage, and the PTB models also list size, power, and net weight. A few buying details still belong in the quote, so ask us when you request one:

  • Warranty and support terms. Ask us when you request a quote; those terms are confirmed in the quotation.
  • Delivery. Delivery is usually 10–15 working days after payment.
  • PT2 size, weight, and power. Those figures are not on the PT2 product page.
  • Basket and portafilter fit. All three models fit 58–58.3 mm baskets, including VST. Confirm your handle type, and ask us if you use a basket outside that range.
  • Below-grinder fit. Name the exact grinder brand and model. If you are considering an additional frame mentioned on a PTB product page, ask us to confirm that frame.
  • Plug type and any local certification requirements. All three models are rated 100–240V, 50/60Hz, which covers standard 120V power in the US. Confirm the plug for your outlet.

If you are comparing CINOART with Puqpress or another brand

This page compares CINOART models with each other. For a cross-brand look, use the review and Puqpress pages linked below rather than treating this table as a ranking of other brands.

If you are still weighing CINOART against Puqpress, Slingshot, Compak, or Sipresso, use the existing automatic tamper review. If you already prefer a Puqpress and need to choose among that brand’s models, see the Puqpress Q2 vs M3, M5, and Mini comparison. Come back here when you are ready to match a CINOART model to your bar.

How to request a quote and confirm fit

To request a quote, tell us the model you are leaning toward and the details that affect fit. The most useful information is:

  • Basket diameter, including whether you use 58.3 mm or VST baskets
  • Portafilter handle type (single-spout, double-spout, or bottomless)
  • Available counter space, if you are choosing the standalone PT2
  • Grinder brand and model, if you want a below-grinder PTB unit
  • Voltage and plug needs for your bar

You can open the CINOART PT2, PTB-FI, or PTB-MY product page, or request a quote directly. We reply within 24 hours. Delivery is usually 10–15 working days after payment.

If you still need the wider product overview, return to the CINOART automatic tampers hub after you have used the table above.

Q&A

What is the difference between the CINOART PT2 and the PTB models?

The PT2 is the standalone countertop model. PTB-FI and PTB-MY sit below the grinder, and you choose between them by which grinder you have.

Per the PT2 product page, the PT2 adjusts from 2 to 38 kg and can run one, two, or three tamps per cycle. The PTB models, per their product pages, adjust from 10 to 30 kg and use three presets. All three use the patented Guide Leveling System.

Do the PT2 and PTB models all fit 58 mm baskets?

Yes. Per CINOART, the PT2, PTB-FI, and PTB-MY all fit 58–58.3 mm baskets, including VST. Each product page also lists a standard 58 mm tamper.

Per the PT2 product page, the PT2 is also confirmed for single-spout, double-spout, and bottomless portafilters. If you use a basket outside the 58–58.3 mm range, ask us when you request a quote.

Which model fits a Fiorenzato, Mythos, or Anfim grinder?

Per the PTB-FI product page, PTB-FI is designed for Fiorenzato grinders. Per the PTB-MY product page, PTB-MY is designed for Mythos and Anfim grinders. The PT2 is a standalone countertop station and is not tied to those grinder families.

The PTB-FI page also mentions an additional frame for Mahlkonig and Mazzer grinders, and the PTB-MY page mentions an additional frame for Compak and Markibar grinders. Confirm that frame and your exact grinder when you request a quote.

Do the PT2 and PTB models use the same leveling system?

Yes. Per CINOART, the PT2, PTB-FI, and PTB-MY all use the same patented Guide Leveling System (GLS).

What voltage do CINOART PT2 and PTB tampers use in the US?

All three models are rated 100–240V, 50/60Hz, which covers standard 120V power in the US. Per the PT2 product page, the PT2 unit itself operates at 12V through an inline step-down transformer.

Confirm the plug type when you request a quote.

How long is the warranty?

Ask us when you request a quote. Warranty and support terms are confirmed in the quotation.

How soon does a unit ship after payment?

Delivery is usually 10–15 working days after payment.