Published:
Last updated:

Direct answer: After knocking the spent puck into the knock box, use the CINOART PC to brush remaining grounds from the basket between shots. The portafilter still needs washing at the end of the shift. Per CINOART, the current model, the CINOART PC, runs a cycle in about 5 seconds, fits single and double baskets from 53 to 58.5 mm, and uses a motor-driven silicone brush. To start a cycle, position the portafilter over the brush head and press down gently. The brush heads are dishwasher-safe; the whole machine is not. The materials are food-safe, which is not the same as disinfection.

This guide is for US cafe owners, bar managers, and trainers who need to install, run, and care for the CINOART PC. It is not a buying checklist and not a full daily cleaning SOP.

If you are still choosing a machine, start with the electric portafilter cleaner buying guide and the portafilter cleaner hub. For between-shot, end-of-shift, and weekly washing of the portafilter itself, use portafilter cleaning for cafes.

CINOART PC automatic portafilter cleaner installed in a cafe knock tube

What the CINOART PC does between shots

An automatic portafilter cleaner is a small, motor-driven unit that clears spent coffee from the basket after a shot. On the CINOART PC, a gentle downward press of the portafilter on the brush head activates the motor-driven silicone brush. Per CINOART, that cycle takes about 5 seconds.

The machine is a between-shots tool. It does not soak the portafilter, does not replace a sink wash, and does not sterilize the handle. Think of it as the step that keeps the basket clear during service, not as the entire cleaning program.

If your question is which brand or voltage to buy, that decision belongs on the buying guide and in the quotation, not in this operating article.

Install it on a knock box or a workbench

Per CINOART, the PC can be installed in a knock box (also called a knock tube) or on a workbench. Choose the location that matches the path your baristas already use after a shot: close enough that they will actually use it, and stable enough that the portafilter sits square on the brushes.

Do not cut or drill a counter until the supplier has confirmed the opening and mounting details for your exact bar.

Before the first service, confirm that the basket you actually use sits fully on the brushes, that spent grounds have a clear path into the knock box or bin, and that staff can reach the unit without crossing a busy walkway.

CINOART PC automatic portafilter cleaner installed on a workbench

How to run a cleaning cycle

A practical between-shot cycle on a CINOART PC looks like this:

  1. Finish the shot and take the portafilter off the group head.
  2. Knock out the spent puck into the knock box, then bring the portafilter to the cleaner with the basket facing the silicone brushes.
  3. Position the portafilter over the brush head and press down gently. Per CINOART, this activates the motor, which rotates the brush head to clean the portafilter. The cycle takes about 5 seconds.
  4. Check that the basket is clear enough for the next dose, then return to dosing or to the group head.

Time the whole handoff on your own bar, not just the 5-second figure. Placement, queueing, and wiping the portafilter rim still add time. If grounds remain in the basket or around the rim, do not start the next shot on a dirty bed; clear them before dosing again.

General operating advice: keep the area around the brushes dry enough to work safely, and empty the knock box or grounds bin often enough that waste does not pack back into the brush area. CINOART has not published a required emptying interval, so set a frequency that matches your volume.

Basket size and fit

Per CINOART, the PC fits single and double baskets from 53 to 58.5 mm. That range includes common 58 mm commercial baskets as well as slightly larger or smaller sizes inside the stated limits.

Before you rely on the machine in peak service, test the exact portafilters and baskets on your bar. If a basket sits outside 53 to 58.5 mm, or if the shape does not sit level on the brushes, confirm fit in the quotation rather than forcing the handle down.

A good fit should let the silicone brushes reach the bed of the basket without the portafilter rocking. If the basket is only partly cleaned, stop and check alignment and size before changing any other setting.

Top view of the CINOART PC automatic portafilter cleaner

What the machine does not replace

The CINOART PC does not replace daily and weekly portafilter cleaning. Oils, fine particles, and residue on the basket, spouts, and handle still need a proper wash. The between-shots article on portafilter cleaning covers that routine: a quick clear between shots, a wash at the end of the shift, and a deeper clean on a weekly cadence.

Per CINOART, the PC is made with food-safe materials. Food-safe describes the materials that touch the basket. It is not a disinfection claim, and it is not a reason to skip detergent, rinsing, or a scheduled soak of the portafilter itself.

General operating advice: if a basket starts to taste off, flows unevenly, or shows baked-on residue, take it through the regular wash even if the automatic cleaner is in use. The machine can keep service moving; it cannot repair a neglected portafilter.

How to care for the brush heads

Per CINOART, the brush heads on the PC are dishwasher-safe. That applies to the brush heads only. Do not put the whole machine in a dishwasher, a sink soak, or a hose-down unless CINOART has confirmed that step in writing for your unit.

Ask CINOART or your distributor how to remove and wash the brush heads, how to inspect them for wear, and what to do if a brush is damaged.

General, non-invasive care that any cafe can apply without opening the housing:

  • Look at the brushes at the start and end of a shift. If they are bent, torn, or packed with dry coffee, clean or replace them before the next rush.
  • Clear loose grounds from the visible brush area with a dry cloth or brush. Do not force liquid into openings you have not been told to wash.
  • Wash the dishwasher-safe brush heads according to the supplier’s instructions, then refit them securely before service.
  • If the motor sounds unusual, stops mid-cycle, or the unit shifts on the counter, take it out of service and request support rather than opening the housing.
Motor-driven silicone brush heads on the CINOART PC portafilter cleaner

How to train staff to use it during service

A CINOART PC only helps if staff actually use it between shots, and use it square on the brushes. A short handover should cover where the unit sits, how to present the portafilter, how to check that the basket is clear, and when to stop and wash the portafilter at the sink.

General training advice, not a CINOART-mandated syllabus: show a new barista one clean cycle, one example of a basket that still needs a wipe at the rim, and where to put a worn brush head aside. Add the machine to the same opening and closing checks you already use for the knock box and the sink, without turning those checks into a second specification sheet.

What to confirm in a quote or after delivery

Per CINOART, the PC is CE certified. It is not ETL certified. US cafes that need a specific mark for their inspector or landlord should confirm the requirement in the quotation instead of assuming a mark that the product does not have.

CINOART quote requests are answered within 24 hours. Delivery is usually 10–15 working days after payment. Office hours are Monday to Saturday, 9:00–18:00. Voltage, plug type, warranty terms, and any site-specific install measurements are confirmed in the quotation; this page does not state those figures.

If you are writing to request a quote or asking for care advice after delivery, include the basket sizes you use, whether you plan a knock-box or workbench install, and any photos of the counter or knock box. That helps the reply match the bar you actually run.

The product specifications and current photos stay on the CINOART PC product page. The portafilter cleaner hub remains the place to start if you are comparing automatic cleaners as a category.

Questions about using and maintaining the CINOART PC

Per CINOART, a cycle takes about 5 seconds. Position the portafilter over the brush head and press down gently; this activates the motor, which rotates the brush head to clean the portafilter. That is the machine cycle, not the full time from the group head back to the next dose. Time placement, the cycle, and a quick check of the basket on your own bar.

Per CINOART, the PC fits single and double baskets from 53 to 58.5 mm. Test the exact portafilters you use. If a basket is outside that range, confirm fit before you order or before you rely on the unit in service.

No. Per CINOART, the brush heads are dishwasher-safe. That does not apply to the whole machine. Do not wash the housing in a dishwasher or soak the unit unless CINOART has confirmed that step for your machine.

No. Per CINOART, the materials are food-safe. Food-safe is not disinfection. The basket and portafilter still need a regular wash at the end of the shift and a deeper clean on your usual weekly schedule.

Per CINOART, the PC can be installed in a knock box (knock tube) or on a workbench. Confirm the opening and mounting details for your counter or knock box in the quotation before you cut or drill anything.

No. It is a between-shots tool for clearing spent coffee from the basket. Daily washing and weekly deep cleaning of the portafilter still need to happen. Use the portafilter cleaning guide for that routine.

Per CINOART, the PC is CE certified and is not ETL certified. If a US location requires a particular mark, confirm that requirement in the quotation.

CINOART has confirmed that quote requests are answered within 24 hours. Delivery is usually 10–15 working days after payment. Office hours are Monday to Saturday, 9:00–18:00. Fit, install details, and delivery for a specific order are confirmed in the quotation.